Burbank Cloud King Bed Frame with Sliding Side Shelves

A cloud-style king bed: a thick, fully rounded foam surround covered in soft off-white plush, a plain padded headboard, and two small wooden shelves that slide along the side rails to wherever you want them.

The maker gives the outside size as 87 in wide, 90.5 in long and 37.6 in tall; its drawing shows the headboard at 87.8 in across and 4.9 in thick. For room planning, allow 87.8 inches: on the drawing, the 87 inch figure is the width of the padded base. The padded border around the mattress stands 8.9 in high and runs down to the floor, so nothing shows underneath. Across the width, the frame adds about 5.5 inches on each side of a 76 inch king mattress. Our king size bed dimensions guide shows the room sizes that work.

What you get

• Surround and headboard in off-white plush fabric (listed by the maker as sherpa) over compressed foam, with no hard corners
• Steel frame with steel slats, a center rail and support feet, as the maker's drawing shows; non-slip feet
• Two wooden side shelves, each 11.8 x 7.9 in, that slide along the rails
• No box spring needed (maker)
• One compressed box: the foam takes its basic shape in about 30 minutes and is fully firm after 1 to 2 days (maker's figures)

Mattress, pillows and bedding are not included.

Compare it with the other frames in our upholstered king beds collection.

Specifications

Good to know: the maker does not publish a weight capacity for the bed or for the shelves, nor the number or spacing of the steel slats. Once the foam surround is out of its wrapping it expands and cannot go back into its box, so measure your room before opening it. The maker lists the cushion as 8.7 in thick and draws it at 8.9 in. Our box spring guide explains when a slatted base is enough.

Shipping and returns

Free shipping to the 48 contiguous US states and Washington, DC. This bed ships by parcel carrier, in 1 box (about 88 lb in total), delivered to your door. Check every box and part on delivery: if anything is damaged or missing, email hello@king-size-bed.com with photos and we send a replacement or refund at no cost. If you change your mind, you can return it within 30 days. Full terms: refund policy.

Questions about this bed

How tall is the headboard?

37.6 inches from the floor, a little over 3 feet. The padded border around the mattress is 8.9 inches high.

How much room does it need?

87 by 90.5 inches, before any walkway. Centered in a 12 foot (144 in) wide room, it leaves about 28.5 inches on each side. Counting the 87.8 inch headboard from the drawing, allow about 28 inches on each side.

What can the side shelves hold?

Each wooden shelf is 11.8 by 7.9 inches, enough for a phone, a book or a cup, and it slides along the rail. The maker gives no weight limit, so keep them for light things.

How is it delivered?

In one box of about 47 x 15 x 16 inches and 88 lb, by parcel carrier to your door.

Comparing cloud beds? See all our cloud bed frames.

Like the Burbank, most beds in our low profile king bed frame line hold the mattress on slats, so it stays low without a box spring.

This frame stands on non-slip feet; if the mattress on top creeps instead, read how to keep a mattress from sliding.

Its padded border runs down to the floor. For other frames with no gap underneath, from the 25.2 inch Provo to the Kennebunk four poster, see our king floor bed frames.

Want the shelves fixed in the headboard instead of sliding along the rails? See each king bed with shelf headboard we carry; three of the six have USB ports.