King Bed Frame
Athens Walnut Pine Cane King Bed with Woven Headboard
$255.98Frame only
- Outside 80 x 83.8 in
- Parcel delivery to your door
- Delivery: usually 3-5 business days
Free shipping · 30-day returns · Secure checkout
VISAMastercardAMEXPayPalApple PayG PayKlarna
The Athens is a king bed frame for a 76 x 80 inch US king mattress. Outside, it measures 80 in wide, 83.8 in long and 36.2 in tall. Free shipping to the lower 48 states and DC, usually delivered 3 to 5 business days after your order, with 30-day returns.
Dimensions
| Mattress | 76 x 80 in (US king) |
|---|---|
| Frame outside (W x L) | 80 x 83.8 in |
| Headboard height | 36.2 in |
| Box spring | Unclear: the maker's listing contradicts itself (its description says no box spring is needed and the photos show a slat deck; one spec field says a box spring is required). Check with us before buying. |
| Shipping | Parcel carrier, 1 box (about 70 lb in total), delivered to your door |
| SKU | KBF-WD-316 |
Description
A plain, honest wood bed with a warm walnut finish and a headboard set with two panels of woven cane, raised on square legs that leave open space underneath.
The maker lists the assembled bed at 80 in wide, 83.8 in long and 36.2 in tall; its drawing rounds this to 79.5 x 83.5 x 36 inches. Between the rails, the drawing gives 77.2 by 81.1 inches, so a standard 76 x 80 inch king mattress sits inside with about half an inch to spare per side. The top of the side rails is 15.7 inches off the floor, a mid height that suits most furniture. Our king size bed dimensions guide shows how this frame compares with other king footprints.
What you get
- Headboard, footboard rail and side rails in pine, finished in a dark walnut tone (maker's specification)
- Two woven cane panels framed into the headboard, which the maker describes as rattan
- A slat deck over two lengthwise center rails, with extra legs under the middle, as the photos of the bare frame show
- Open space under the frame for low baskets or bins
- Shipped in 1 box, with the hardware and instructions for assembly
Mattress, pillows and bedding are not included.
Compare it with the other frames in our wood king bed frames collection.
Specifications
| Outside size | 80 in W x 83.8 in L x 36.2 in H (maker's figures; its drawing shows 79.5 x 83.5 x 36 in) |
|---|---|
| Mattress size | US King (76 x 80 in) |
| Recommended mattress thickness | not stated by the maker |
| Clearance under the bed | not stated by the maker; the side rails top out at 15.7 in |
| Weight capacity | not stated by the maker |
| Materials | pine frame, woven cane panels; slat wood not stated by the maker |
| Color | walnut brown with natural cane |
| Made in | Vietnam |
| Assembly | assembly needed, hardware and instructions included |
Good to know: the maker's listing is not consistent about the box spring. Its description says no box spring is needed and the photos show a full slat deck with center supports, but one field of its spec sheet reads "box spring required". Until the maker confirms which is right, check with us before buying. It does not publish a weight capacity, the number of slats or their spacing either. If your mattress warranty sets a maximum gap between slats, write to us before ordering and we will ask the maker for the figure. Our box spring guide explains when a foundation matters.
Shipping and returns
Free shipping to the 48 contiguous US states and Washington, DC. This bed ships by parcel carrier, in 1 box (about 70 lb in total), delivered to your door. Check every box and part on delivery: if anything is damaged or missing, email hello@king-size-bed.com with photos and we send a replacement or refund at no cost. If you change your mind, you can return it within 30 days. Full terms: refund policy.
Questions about this bed
How tall is the headboard?
36 inches from the floor, just over 3 feet, on the maker's drawing (36.2 in on its spec sheet). With a 10 inch mattress on top of the slats, a good part of the cane panels stays visible above the pillows.
How much room does it need?
About 80 by 84 inches. In a 12 foot (144 in) wide room, centered on the wall, that leaves roughly 32 inches on each side for nightstands or a walkway. Lengthwise, plan for 83.8 inches, almost exactly 7 feet, plus space to walk at the foot.
Can I store things under it?
The legs leave the floor open below the frame, and the maker's own photos show low storage boxes tucked underneath. It does not give the exact clearance, so measure your bins against the 15.7 inch rail height, keeping in mind the slats and center rails sit a little lower.
How is it delivered?
By parcel carrier, to your door, in a single flat box of about 70 lb measuring 83 x 17 x 4.6 inches. It is long rather than heavy; check the turn at the top of your stairs.
Will it fit?
Floor footprint: 80 x 83.8 in, from the maker's outside size. With 2 ft of clearance on both sides and at the foot, plan on a room of 11.0 x 9.0 ft or more.
Delivery and returns
Usually delivered 3 to 5 business days after your order (parcel carrier, 1 box (about 70 lb in total), delivered to your door). Shipping is free to the lower 48 states and Washington, DC.
Returns within 30 days.
Also inBrown King Bed FramesCheap King Bed Frames Under $300King Platform BedsKing Size Headboard and FrameRattan King Bed FramesWalnut King Bed FramesWood King Bed Frames
Before you buy
Will a king bed fit your room?
King, California king and queen, to scale
Mattress sizes in inches. A frame adds a few inches on each side.
Open the full size guide →Quick room check
Enter your room size in feet. We use this frame's outside size, 80 x 83.8 in, and keep 24 in of walking space on each side and at the foot of the bed.
Similar king beds
